| Recommended connectors
for DC fan motors |
Click the PDF file to open, then
download the file to your hard disk. |
|
| Manufacturer |
Housing model |
Contact model |
| Hirose |
DF3AA-*EP-2C |
DF3-EP2428PCF |
| DF1B-*ES-2.5RC |
DF1B-2428SCF |
| Tyco Electronics AMP.
|
179228-* |
179227-1 |
| 171822-* |
170262-1 |
| Japan Solderless Terminals
|
PHR-* |
SPH-002T-P0.5S |
| XHP-* |
SXH-001T-P0.6 |
| SMR-0*V-N |
SYM-001T-0.6 |
| EHR-* |
SEH-001T-P0.6 |
| H*P-SHF-AA |
SHF-001T-0.8BS |
| Molex Inc. (Japan) |
5051-* |
5159T |
| 5264-* |
5263PBT |
| 51030-0*30 |
50084-8014 |
| 51065-0*00 |
50212-8000 |
| 5557-0*R |
5556* |
| 5559-0*P |
5558* |
| Japan Aviation Electronics
Industry |
IL-S-*S-S2C2-S |
IL-S-C2-S-10000 |
| IL-G-*S-S3C2-SA |
IL-G-C2-SC-10000, |
| IL-*S-S3L-(N) |
IL-C2-1-10000, IL-C2-10000 |
Note 1 :(*)denotes number of poles (ex : -2 or -02 for two poles, -3 or -03 for three poles).
Note 2 : The specifications in this table are for reference
purposes only. When selecting, please consult relevant maker catalogs.
|
Thermistor
| Model : 169-002 |
| Symbol |
Designation |
Standards, materials, etc. |
 |
Thermistor |
Chip |
 |
Insulated cord |
Epoxy resin |
 |
Lead |
UL2555 CSA TR-64 AWG#28(blue) |
|
| Item |
|
Standard |
| 2-1 |
Resistance |
R25 6.8 KΩ±3% |
| 2-2 |
B constant |
25/50 3950 K±2% |
| 2-3 |
Maximum rated power |
188mW (25°C in still air) |
| 2-4 |
Insulation resistance |
100MΩ or more(500 VDC megger) |
| 2-5 |
Dielectric strength |
To be trouble-free (1,500 VAC, 1
minute) |
| 2-6 |
Operating temperature range |
-30°C to +80°C |
| 2-7 |
Storage temperature range |
-40°C to +100°C |
These thermistors are 159-682-86003
(manufactured by Hokuriku Electric Industry).
For details, contact Tokyo Office at 03-3722-1341. |
|
|
IC L8730 specifically designed for
DC fan alarm
Characteristics
Startup delay
They do not emit an alarm at power-up until the fan reaches a normal rotation state. |
Output current
10mA max.(sink/Open drain output) with/without
latch function |
Input system
Single input: These ICs allow the entry of digital signals between
Vcc and GND. |
Noise margin
with a built-in malfunction-protective circuit |
Supply voltage range
+5V±0.5V |
|
Dimensions
Typical application
Use it for the receiving circuit of a Sanyo Denki's brushless DC San Ace (with a pulse sensor).
 |
|
|
