Splash Proof Fan San Ace 80W Square type : 80mm Thick : 38mm The PDF file of this product can be downloaded. IP55, PWM Control, Ribbed model Features Material Frame:Plastics (Flammability: UL94V-0) Impeller: Plastics (Flammability: UL94V-1) Life Expectancy 40,000h/60ºC (70,000h/40ºC) (L10: Survival rate: 90%, rated voltage, and continuously run in a free air state) Motor Protection System Current blocking function and Reverse polarity protection Dielectric Strength ------------------------------------ Insulation Resistance 50/60 Hz, 500VAC, 1 minute (between lead conductor and frame) -------------------------------------------------------------------------------------------------------------- 10M¦¸ or more at 500VDC megger (between lead conductor and frame) Sound Pressure Level (SPL) Expressed as the value at 1m from air inlet side Storage Temperature -------------------------------------- Operating Temprature -30ºC to +70ºC(Non-condensing) -------------------------------------------------------------------------------------------------------------- -10ºC to +70ºC(Non-condensing) Lead Wire +: red -: black Sensor: yellow Control: brown Specifications Model No. Rated Voltage (V) Operating voltage range (V) Rated current (A) Rated input (W) Rated speed (min-1) Air flow (m3/min) Static pressure (Pa) Noise (dB[A]) Mass (g) 9WV0848P1H001 48 40.8 to 52.8 0.75 0.15 36 7.2 9,700 (PWM Duty 100%) 4,500 (PWM Duty 0%) 3.7 (131CFM) 1.72 (60.8CFM) 440 (1.77inchH2O) 94.7 (0.38inchH2O) 63 43 235 Corresponding accessories list Finger guards Square type Adaptation machines-Frame size:80mm Model No. Surface Finishing Adaptation machines 109-049C Nickel-chrome plating San Ace 80 Finger guards Square type Adaptation machines-Frame size:80mm Model No. Surface Finishing Adaptation machines 109-049E Nickel-chrome plating San Ace 80 109-049H Cation electropainting San Ace 80 Resin finger guards Square type Adaptation machines-Frame size:80mm Model No. Material 109-1002G Frame:(SPS＋PS alloy)Resin UL File No.E48268 94V-0